製品情報へスキップ
1 の 9
ベンダー: Rodyweil Audio

RO03 2i2 Two Channel Mic Preamp,19~66db Adjustable Gain -120db EIN,Ultra Low Noise,2 Input and 6 Output, Type C Power Input, 48V Phantom Power

通常価格
$69.99
通常価格
販売価格
$69.99
  • ULTRA-LOW NOISE MIC PREAMP: If your mic is too quiet unless you crank your interface gain — and then the hiss kicks in — the RO03 2i2 is the fix. With up to 66 dB of clean gain and an ultra-low -120 dB EIN, this mic preamp handles the gain before your interface, delivering a clean, clear, and quiet recording.
  • TRUE 66 dB OF POWERFUL GAIN: Got a gain-hungry mic your interface struggles to drive? The RO03 2i2 mic preamp delivers a true 66 dB of gain, easily bringing mics like the Shure SM7B, SM58, and MV7 up to a strong, usable level. Get clear, present vocals your audience can actually hear — no more weak, dull-sounding audio.
  • FLEXIBLE I/O FOR ANY SETUP: The RO03 2i2 mic preamp handles two mics, two instruments, or one of each at the same time. Each channel provides +4 dBu balanced outputs and a -10 dBV unbalanced output — 6 outputs total, all usable simultaneously. Easily connect to audio interfaces, mixers, pro audio gear, or consumer audio equipment.
  • USB-C POWER FOR RECORDING ANYWHERE: No bulky 12V power adapter needed. The RO03 2i2 mic preamp runs on standard 5V/1A USB-C power and can even be powered by a portable power bank. Take it anywhere for outdoor interviews, Vlogs, field recording, or mobile setups and get clean, powerful mic gain wherever you record.
  • DUAL LINE LEVELS FOR MORE GEAR: The RO03 2i2 mic preamp gives you both +4 dBu professional line outputs for audio interfaces, mixers, and studio gear, plus -10 dBV outputs for consumer and entertainment equipment like karaoke systems and powered speakers. One mic preamp, more ways to connect, and more flexibility for any setup.
  • CONNECT IT RIGHT, KEEP IT CLEAN: For pro audio gear, connect the RO03 2i2 mic preamp to a LINE input using a TRS cable or XLR female-to-TRS cable. Do not run the +4 dBu output into a MIC input — this common setup mistake can cause excessive level, distortion, and unwanted noise. Proper gain staging starts with the right connection.

Guaranteed safe checkout

  • PayPal
  • Description
  • Q&A

Customer Reviews

⭐⭐⭐⭐⭐ By jjason
Reviewed in the United States on September 10, 2026

Very useful for mic and guitar

I use a PodMic and guitar for home recording and this little preamp makes the setup much easier. Mic goes into one channel and guitar into the other.

Plenty of gain for the PodMic and it stays surprisingly quiet. The Hi-Z input also works great for my guitar, so I don’t need another DI box.

Simple, clean and does exactly what I needed.

⭐⭐⭐⭐⭐ By Jake
Reviewed in the United States on September 12, 2026

Two good channels for the price

I needed two separate mic channels and the RO03 2I2 has worked great.

Both channels have their own gain and outputs. Noise is very low and I can push the gain pretty high without getting a lot of hiss.

I used a Cloudlifter before and after matching the levels I really can’t hear much difference in clean gain.

Very good value for two channels.

⭐⭐⭐⭐⭐ By Mark
Reviewed in the United States on September 18, 2026

Better than I expected

I’ve been recording for years and honestly bought this as a cheap temporary preamp.

It surprised me. Lots of clean gain and very little background hiss, even with my lower output mics.

I’ve used more expensive preamps and this holds up much better than I expected for the price.

Very happy with it.

⭐⭐⭐⭐⭐ By DDDD
Reviewed in the United States on September 21, 2026

Replaced my old mic booster

My Cloudlifter stopped working so I bought the RO03 2I2 as a replacement.

Connected it to the line inputs on my interface and it works perfectly. Plenty of gain, clean signal and very little hiss.

I originally planned to use it temporarily, but it has stayed in my setup and I use it almost every day.

Great little preamp.